OR-T 250

These operating instructions are intended to simplify fa- miliarisation with the strapping tool and its proper use for the intended purpose. The operating instructions contain important information concerning the safe, proper and efficient use of the strapping tool.

The operating instructions must always be available at the place of operation of the strapping tool. They must be read and observed by all persons working with or on the strapping tool.

In addition to the operating instructions and the regula- tions for accident prevention effective in the country of use and place of operation, the recognised technical regulations for safety and proper operation must also be observed.

Easy

  • Depending on application, adjustable operation mode
  • Fully automatic
  • Semi-automatic
  • Manual
  • Soft

Safe

For multiple strapping or for the same types of qoods:

  • Consistent strappings
  • Automatic strapping eliminates operator error

Strapping with PP strap or for fragile
packages:

  •  “Soft” mode

Economic

  • Energy-efficient strapping system
  • More cycles per battery charge
  • Cost efficient
  • Service-f riendly design
  • High quality

Fast

Regardless of package, size, vertical
or horizontal strapping:

  • Fuly or semi-automatic tensioning, welding, and strap cutting – with only one push of a button

EnvironmentalIy-friendly

Latest brushless motor engineering with the latest environmental-friendly battery technology from Bosch:

  • High efficiency ratio
  • No memory effect
  • Recharging at any time
  • Hrgh number of strapprngs per charqe

Battery-Hand Tool For Plastic Strapping

OR-T 250

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.
Our Services

Recommended Spare Part ORT 250

PosPart NoPart NameQuantity
461821.047.013Tension wheel1
531821.048.015Tooth plate1
1661821.209.019Knife1
2222187.001Battery, 14 V / 2,6 AH Li-Ion1
2222187.002Battery, 14 V / 2,6 AH Li-Ion, US1

PARTS LIST ORT 250

PosPart NoPart NameQuantity
11832.011.170Base plate complete, incl. pos. 2-6 1
2
31921.310.501Cylinder pin 1
41921.906.262Roll pin1
51935.510.100Slide bearing 4
61935.508.080Slide bearing1
91832.022.109Tooth plate bottom1
101832.022.055Set screw1
11
121821.061.018Bevel wheel with pinion1
131926.502.100Free-wheel needle bearing1
141930.190.154Ball bearing1
151917.411.208Spacer disk1
16
17
181930.180.356Ball bearing3
191832.039.211Blocking wheel1
201821.060.016Planetary wheel, 1st step3
21
22
251832.039.165Planetary support complete1
26
27
281917.401.125Spacer1
31
321832.039.197Flange complete, incl. pos. 35,361
351935.504.060Slide bearing1
361933.710.150Needle bushing1
37
38
391917.411.045Spacer disk1
401920.103.062Lock washer1
411911.004.127Cylinder screw11
421832.031.051Strap guide 13mm1
431911.804.064Counter sunk screw2
441832.039.207Cam disk1
451821.060.014Planetary wheel, 2st step3
461821.047.013Tension wheel1
47
48
501832.031.054Rocker complete, incl. pos. 51
51
52
531821.048.015Tooth plate1
541832.039.200Pan head screw1
551832.031.048Strap stop, front 13mm1
56
57
591832.039.214Pawl shaft1
601832.039.213Pawl wheel2
611920.105.072Retaining ring1
62
641832.039.208Bolt1
651832.031.057Blocking pawl1
661920.108.102Retaining ring2
67
68
701832.022.186Bolt1
711917.411.052Spacer disk1
721832.022.185Reset cam1
731910.404.104Set screw1
741920.104.072Retaining ring6
751832.031.060Support micro switch1
761912.404.104Panhead screw4
771821.151.017Welding cables1
78
79
811821.010.095Compression spring1
821925.010.802Ball1
831821.010.092Compression spring1
841925.010.902Ball1
851832.039.210Set screw1
861910.408.064Set screw1
87
88
891832.031.061Rocker lever complete1
901832.039.199Toothed lever1
91
92
951821.140.076Motor complete1
961832.022.191Motor support complete1
97
98
991912.203.086Counter sunk screw6
1001917.411.041Spacer disk3
1011821.027.037Shoulder screw2
1021911.104.304Cylinder screw1
1031821.151.016Cables tensioning1
1041912.401.104Panhead screw1
105
106
1081930.170.302Ball bearing1
1091832.022.160Excentric cam1
1101821.060.023Planetary wheel, 3st step3
1111917.401.122Spacer disk1
1121832.039.203Carrier complete 2st step1
113
114
1161821.060.024Planetary wheel, 2st step6
1171917.411.062Spacer disk2
1181832.039.201Carrier complete 1st step1
119
120
1241821.020.151Ring1
1251832.022.196Cover motor support1
1271832.039.196Belt wheel complete1
128
129
1301832.022.161Starting disk1
1311930.180.152Ball bearing2
1321821.061.019Bevel wheel complete1
133
134
1351832.022.159 Spacer ring1
1361920.215.102 External retaining ring1
137
138
1401832.022.184Switching cam1
1411917.411.051Spacer2
1421821.031.055Bolt1
1431832.022.163Bolt1
1441832.022.174Bolt1
145
1461832.022.180 Screwed shaft1
1471832.022.181Lower linkage1
1481832.022.182Upper linkage1
1491821.010.098Compression spring1
150
1531832.022.171Swivel bearing1
1541930.100.072Ball bearing2
1551832.022.164Excentric shaft1
1561917.401.105Spacer disk2
1571933.210.120Needle bearing1
1581832.022.169Welding shoe1
1591925.010.502Ball4
1601832.022.165Supporting disk1
1611832.022.139Pinion1
1621821.067.011Toothed belt1
1631821.020.147Washer1
1641911.304.084Cylinder screw1
1651832.022.173Bolt1
1661821.209.019Knife1
1671832.022.049Flanged bushing1
1681821.010.053Compression spring3
1691821.010.020Compression spring1
170
1721832.042.044Lever strap guide complete1
1751832.011.168Side cover1
1761821.035.007Bearing bolt1
1771832.041.018Rear inner guide 16mm1
1781832.041.019Rear inner guide 13mm1
179
180
1811832.042.043Strap guide rear 13mm1
1821912.404.064Panhead screw1
1831832.011.171Gear cover1
184
1861832.011.198Housing parts, blue1
188
1891821.091.052Type plate1
190
1911832.011.201Motor cover complete1
1921821.090.021Name plate1
193
194
1971914.635.200PT-Screw9
1981821.152.069Printed circuit board1
1991832.061.016Protection cover pcb1
2001914.622.062PT-Screw2
2011821.151.015Intermediate cable1
2021821.151.018Signal cable1
2031821.076.018Gasket2
2041832.011.181Protection plate1
2051832.011.184Switch button1
2061821.010.054Compression spring1
207
208
209
2121821.152.072Printed circuit board complete1
213
214
2151821.152..074Contact plate 14.4 V1
216
217
2222187.001Battery 14.4V / 2.6 Ah Li-Ion1
2222187.002Battery 14.4V / 2.6 Ah Li-Ion, US1
223
2242188.001Battery charger AL 1860CV-EU1
2242188.002Battery charger AL 1860CV-US1
2242188.003Battery charger AL 1860CV-JP1
225
226
2271821.901.004Wire brush1
2281821.901.006Screw driver, crosstip1
2291821.901.007Angle-wrench, hexagon1
230
231
232
233
2342189.002Option: protection plate-set
235
2361911.804.064Counter sunk screw5
237
2392189.003Option: Protection cover
240
2411914.635.300PT-Screw2
2421914.635.140PT-Screw2
243
2452189.001Option: suspension bow-set
246
2471911.004.208Cylinder screw3
2481911.005.168Cylinder screw2
249
2512189.004Option: Strap guide set 9mm
257
258Option: Power supply connection
2592188.011Mains Connector 230V EU1
2592188.012Mains Connector 115V US1
260

Drawing Sparepart

ORT-250

Drawing Sparepart

ORT-250